Thursday, October 27, 2011
This weeks sketch challenge is by Dream Team member Kim Parkinson. And the technique I chose is appropriate for her creation because she was one of the first people that ever sent me a card with alcohol inks showcased. It was such an inspiration that I have been intrigued with the idea of working on metal with alcohol ever since.
I began by dry embossing the new "Prince of Peace" stencil (LX7004) through my embossing machine with a yellow-gold colored aluminum. Remember the stacking process is important so you don't bend the stencils. Here is the formula that works best...follow this order for all of the plates and materials for the best results.
1. Thick white plate (Cuttlebug and Big Shot both have these).
3. Material to be embossed goes face down on the stencil in this case gold colored metal is against the stencil
4. Thick rubber mat by Stamping Details
5. Two acrylic plates (be sure these are not warped and if you are using the Cuttlebug it would be the two "B" plates.
After it is embossed I removed it from the stencil and sanded the raised lettering with a fine grit sanding block or manicure block. Then I repositioned the stencil onto the metal and daubed a mixture of Color Solution alcohol ink (the color was Sugar Plum CS208) with thinner or blending solution (CSC). This was accomplished by dripping just a few drops of each onto a felt applicator. The new one ounce bottles have a control tip nozzle that just squeezes out one drop at a time.
Then I dry embossed the nativity stencil (LL3019) onto a plain "silvery" colored piece of aluminum using the same stacking formula as above and then removed the stencil and daubed the entire surface with the same Sugar Plum Color Solution (CS208) using a felt applicator. Because I wanted to colorize the nativity with a yellow gold color I replaced the stencil and wiped the purple color off of the design using a cotton swab dampened with thinner. Doing this gave me a clean surface to work on, otherwise the purple would mix with the next color I used. The Color Solution Gold Star (CS203) matches the background to a "t" and was perfect to then stencil a beautiful yellow-gold color onto the nativity. Again I achieved this using a clean piece of felt on my applicator, but this time I wanted it to be more opaque so I didn't add thinner like I did with the Sugar Plum Color Solution.
Once these pieces were dry I mounted the nativity onto a glossy piece of black cardstock and again onto the metal piece.
If you would like to play along with our sketch this week sign up on mr. linky below. And be sure to follow the "dream team" list at the sidebar on the right of my blog to see what the other members have done this week.
Posted by Lynell Harlow / Dreamweaver Stencils at 3:00 AM
- December (2)
- November (4)
- October (7)
- September (8)
- August (14)
- July (7)
- June (4)
- May (6)
- April (4)
- March (6)
- February (7)
- January (6)
- December (7)
- November (6)
- October (7)
- September (7)
- August (15)
- July (11)
- June (7)
- May (10)
- April (18)
- March (7)
- February (6)
- January (8)
- December (5)
- November (8)
- Cards via Snail Mail
- Thursday's Dream Schemes/Sketch by Kim
- Art for Joplin
- Thursday's Dream Schemes/Artist Grade Alcohol Inks...
- Black Flocking on Glossy Black Paste
- Aint She Sweet and Pretty in Pink (and black)
- "You Tube" Video of the Double Glitter Technique
- It's a Girl/More Pink and Black
- Ink Transfer using your Embossing Machine:
- Get Ready-Get Set-Get your "Glossy" Valentines Don...
- Thursday's Dream Schemes/Colorway Challenge- Pink ...
- Thursday's Dream Schemes/Our Canadian Friends
- September (5)
- August (6)
- July (4)
- June (5)
- May (4)
- April (4)
- March (5)
- February (12)
- January (8)