Black Flocking on Glossy Black Paste

I loved doing this card. The flower lace background stencil (LJ820) is one of my favorites. This time I paste-embossed it with Glossy Black Embossing Paste (DGKP)... in fact I used the new paste spreader (LM2010) to paste-emboss the black paste onto a pale pink cardstock. The new spreader is especially wonderful for large lacy designs like this one. After I removed the stencil and while the paste was very wet I sprinkled the black flocking generously over the design. I placed it on my pancake griddle to hasten the drying time. (It usually cuts the drying time in half ...if not faster.) Then I turned on my laminator to give it time to heat up. After about 20 minutes I knocked the excess flocking off the paste (you don't want it too thick going through the laminator) and then sprinkled it sparsely with the black flocking. I then placed it into a folded piece of glossy paper and ran it through my now well heated laminator. The heat and pressure helps push the flocking into the slightly heated glossy black paste. I trimmed it out and tied it up with a pale pink ribbon and a black organza ribbon to make it look like a package wrapped in black lace. The small celebrate stencil (LS89) was placed onto a small glossy black tag and then paste-embossed with a mixture of Glossy White Embossing Paste (DGWP) and a small amount of Glossy Red Embossing Paste (DGRP). The ratio was 4 parts white to 1 part red. Remember when you are mixing to make a tint you want the majority of the mix to be white. Once it was dry I tied it into the ribbon. This is a card that people want to touch...the fuzzy surface is a real tactile delight!


This is my last pink/black colorway posting. Tomorrow it is a free challenge day for the Dream Team...come back and see what they are dreaming up!

Aint She Sweet and Pretty in Pink (and black)

This is the pink and black card I mentioned in an earlier post that Pam Hornschu posted a couple of months ago on her blog. She sent me the actual card and every time I look at it I see some small detail that I missed before. One thing that I saw yesterday on the card was that the pink die cut behind the cameo stencil design (LL3017) was dry embossed through an embossing machine using the fleur de lis background stencil (LJ841). And I think it was such a clever detail to put the same die cut behind the pink one and offset it to give it a shadow effect. The little banner saying "little sweetie" is done in the same way.


The houndstooth background stencil (LJ913) was paste-embossed with the Glossy White Embossing Paste (DGWP) on a glossy black cardstock.


For the cameo itself she dry embossed the stencil on a piece of black colored aluminum using her embossing machine. She then removed the stencil and using a low grit manicure block sanded the image. The necklace was a simple embellishment of sticky crystals.


I am amazed at how many different ways you can use this cameo stencil and I am sure the new Dream Team will come up with many more ideas. If you are interested in maybe trying out for the team, be sure to stay tuned for our "call" at the end of the week. And thanks to all of you who have been following my pink and black theme this week.

"You Tube" Video of the Double Glitter Technique

I have really enjoyed doing this double glitter technique with "sticky paper". I cheated a bit and added the yellow-gold mounting paper to give the pink and black an added kick. Recently I was a guest on the TV show Scrapbook Soup and if you want to watch exactly how to do this umbrella using this fun technique click on this YOU TUBE link to take you to the TV session. I tend to be a visual person and I am sure that at least the majority of crafters are the same, so it is nice to be shown how to do a technique, instead of reading the details. You can also email me at lynell@dreamweaverstencils.com if you want me to email you the step by step process of double glittering. The rest of the card was very simply done. The raindrops stencil (LJ905) was paste-embossed with Glossy Black Embossing Paste (DGKP) onto bright pink cardstock. The Showers of Blessing sentiment (LG738) was paste-embossed with Glossy White Embossing Paste (DGWP) onto glossy black cardstock and then glittered with hot pink glitter before it dried. (Marj Marion was again the inspiration for this rain words stencil.) In the YOU TUBE video the umbrella stencil used is (LG737) and the dots stencil (LJ804) was over-layed onto the umbrella stencil and stenciled in black pigment ink.

One thing the Dreamweaver Design Team has done recently is a blog hop with our sister team in the UK. The theme of the hop was stenciling and creating on things that are NOT paper. So for our upcoming "Call" for a new design team we will probably be asking those of you who are interested in trying out for the team to do the same. Put your thinking caps on and look back at the old posts from a few weeks ago to see what our blog hopping team created for this amazing challenge. My favorite saying is: "No idea is immaculately conceived", so be inspired to inspire!

It's a Girl/More Pink and Black

When I make a card that I am doing multiples of I do whatever I can to make it as simple as possible and the "it's a girl" (LM189) stencil was so easy to just stencil with black pigment ink. Even though the holes in this particular stencil are very fine I use as big a brush as I have because I am not worried about shading. Sometimes people think that if the holes are small you need a small brush, but you want as big a brush as possible if there isn't the need for finesse.  Of course the paste-embossed bear was a little more involved, but that too was not so difficult to do quickly. In my new DVD called Tips and Tools (DVD-3) I show how you can paste-emboss multiples of the same design without changing the tape and washing the stencil off after each paste application. DVDs are great if you are a visual learner.


The little bear stencil (LM137) was paste-embossed very simply with the Matte Black Embossing Paste (DMBP). When the design dried I replaced the stencil and daubed some of the Stamp and Stick Glue (GSP) onto her bow and paws and then stenciled them with Pixie Blush Metallic F/X (F/X09).


The ribbons were a black with white polka dots and a pale pink organza tied together. I cut single slits on either side of the bear with an x-acto knife (these were done after I mounted the main card onto the black border cardstock, so they were only cut through these two card front pieces.) Then I threaded the untied pieces of ribbon behind the bear and through these slits. Next I tied the ribbon into a bow and put mounting tape on the back of the black piece of cardstock to then mount onto the bottom pink cardstock.


If you are interested in becoming a member of the Dreamweaver Stencils Design Team stay tuned this next week for more details. One of the requirements will be for you to design a card using all the innovation you can dream up. We won't require that you use stencils just lots of imagination. So Dream it UP!!!

Ink Transfer using your Embossing Machine:

To achieve the background for the cameo Elaine Benedict used a technique that some people are calling "letterpress" and I  am calling "ink transfer". She started by tapping a pink distress ink called "spun sugar" all over her background tapestry stencil (LJ907) and then placed it face up on the thick white plate of her embossing machine. (Please note that stacking the plates in the right order is important so you don't bend your stencil.) She then placed her digital or glossy card stock face down on the inked stencil and followed this with a thick rubber embossing mat by "Stamping Details"(REM). The last two acrylic plates were then placed on top of this rubber mat. (If you are using a Cuttlebug it would be two "B" plates.) Just be sure these acrylic plates are not warped because the end result could be a curved stencil. I recommend that you have two acrylic plates that you use just for embossing with your stencils to avoid this pitfall. Then she embossed this stack of thick white plate, stencil, paper, rubber and last the two acrylic plates through her embossing machine. You want them to go through firmly for the best embossing results. This then transfers the ink from the stencil onto the cardstock and embossed the tapestry design at the same time. I have an instruction sheet on how to stack the plates through your embossing machine...email me at lynell@dreamweaverstencils.com if you are needing this.


She then paste embossed the cameo (LL3017) in Glossy Black Embossing Paste (DGKP) and the happy birthday (LM248) was paste embossed with the Translucent Embossing Paste (DEPT) and sprinkled with a pink glitter. 


This cameo stencil (LL3017) seems to lend itself to this colorway, because this past Thursday design team member, Louise Healy, posted another beautiful rendition of the same stencil for our black and pink colorway challenge. In fact design team member, Pam Hornschu used the same cameo and colorway on her August 25 posting. Yes, these ladies are truly kindred spirits...makes me want to go do my own version right now. LOL!


I want to thank several of you for designing cards to go on my blog this year. Elaine Benedict and Marj Marion have been popular guest designers. Those of you who have occasionally joined our challenges and leave comments keep our creative spirits soaring. So if you are an adventuresome stenciler and would like to join our team be sure to check back next Thursday for more details on what it takes to belong to the Dream Team. Tomorrow we will have another pink and black creation, see you then!

Get Ready-Get Set-Get your "Glossy" Valentines Done Early

Well, this card doesn't have to be a Valentine, but I have several people in my life that already have their Christmas cards finished and are starting on the next holiday...yes, Valentine's Day will be here before we know it . LOL!


The pink dangling heart (LM272) was paste-embossed with a specialty mixture of one Tablespoon of the Glossy White Embossing Paste (DGWP) with one teaspoon of the Glossy Red Embossing Paste (DGRP) mixed together using a palette knife (DPK). These two glossy pastes mixed together equal a sparkling look...and there wasn't even a speck of glitter in sight.


To make the second layer of black paper look like a darker black I used glossy black cardstock. And to make the ribbon look like it was pink with black dots...(it is a white organza ribbon with black dots), I tied it together with two very pale pink ribbons behind it to give it that same pale pink appearance.


Remember I told you we will be putting out a call very soon for a new Dreamweaver Stencils Dream team. What does that mean for you? It means that if  you are interested be sure to practice up on your stenciling skills. At least one of your submissions should be a stenciling project. We will give you more details in one week.


Don't forget to come back and see more black and pink tomorrow! Dream team member Georgia Sommers posted a beautiful card yesterday in honor of Breast Cancer Awareness Week. This reminded me that this past weekend as I was watching the Raiders play football that they were all dressed in black and white and then their shoes, socks, gloves and other accessories were hot pink. Great colorway guys!!!

Thursday's Dream Schemes/Colorway Challenge- Pink & Black

This week is another colorway challenge...my fave challenge of the month you know! Marj Marion from Art n Soul in Olympia is the creator of this darling bird inspired card. In fact Marj was the one that really encouraged us to do a stencil of "bird words" (LG734) as you see in her sample.  This card isn't difficult...just takes a bit of time, so if you are a beginning "paster" give it a try. She paste-embossed both the bird words and the fine feathered friends stencil (LM2009) with the Dreamweaver Glossy Black Embossing Paste (DGKP) and the bird cage (LL3012) was paste-embossed with the Pearlescent Embossing Paste (DPP). The two black birds on the cage were little die cut birds as were the to white birds on the right...these embellishments were die cut on a glossy card stock and then glued onto the card.


As I was trying to decide on what to post this week I discovered that I have several cards done in pink and black, so this week I am going to try (operative word here is "TRY") to post everyday for a week with pink and black....and as I do so I will leave you some encouragement to try out for the Dreamweaver Design Team.  We will be putting out a call in another week with details on what we need from you.


You are probably wondering what it means to belong to a design team...when I put out my initial call over a year ago, two or three of the people who answered the challenge didn't even know how to blog. But they came on board and became bloggers. YAY!!! They are  proof evident that it can be done. LOL!


If you are interested in playing along this week with our colorway challenge sign up on Mr. Linky below, or email me one of your pink and black creations and I will post it this coming week. Be sure to visit the rest of the design team listed on the sidebar at the right for more pink and black inspiration.